![]() This adapter works with mono or stereo 1/4 inch output Jacks. This adapter incorporates a built-in attenuator which reduces the line level signal down to a mic-level signal suitable for input for recording. The headset connections only have a mono mic input so, although you can connect a stereo signal, it will only record in mono. Use this adapter to record from headphone jacks, audio output jacks or from mixers and soundboards that have line-level outputs. This adapter is NOT for recording from microphones. ![]() ![]() The Mic-Line Pro allows you to connect a line-level audio source with 1/4 inch connector to the iPhone/iPad/iPod or other compatible device for quality recording. Crystal clear sound recording, 100% guaranteed.Connect your smartphone to a mixer or soundboard without a additional cables.1/8 inch (3.5 mm) 4 conductor TRRS Male to 1/4 inch (6.35 mm) microphone input plug with built-in attenuator.iPhone - Android 1/4" line-level to mic-level audio converter input adapter.While the Hum Kleaner boosts the signal from the source, the HLLC-200 brings the signal voltage back down at the end of the run to match the amplifier input level. Utilizable in all areas of audio applications, the HLLC-200 can simplify almost any setup at an affordable price. ![]() The HLLC-200 has been proven to be useful in pro sound applications when used in conjunction with the Hum Kleaner, especially when long runs are involved. For example, to add a woofer to an existing system with two powered speakers, all you need to do is supply the high power from the speakers to the HLLC-200 which will then provide a low-level signal input for the woofer without the need of a sub-out from the receiver. line-level output instead 32-bit / 192 kHz AD/DA Converters - capture and hear. This high-low adapter can also be used in home audio application. Expand the input channel count with up to 8 channels of digital audio. The HLLC-200 also offers an optional 12VDC input that can be used to power up the amplifier when the vehicle starts, as well as a 12VDC remote output. This is especially useful on leased vehicles, for people who want a simple and fully reversible audio solution. This means that the low-level signal does not share a ground with the high-power speaker removing the risk of shorting your factory amplifier or radio. The input and output are magnetically isolated from one another. The “differential” aspect of the HLLC-200 is what sets it aside from the competition. This is especially useful with factory or aftermarket radios that do not provide dedicated RCA outputs. It can reduce the high power output of an amplifier to that of a low level signal input in RCA down to between 0.1 and 6 Volts. The HLLC-200 high/low level converter is a high power differential high low adapter with several beneficial uses. Hum Kleaner increases gain at the source and HLLC reduces the gain back down at the end of the run to amplifier input level. Pro Audio: Pair with Hum Kleaner for installations that have run distance of 20 ft and up to 200 ft.Home Audio: Add a subwoofer to your powered speakers by supplying the high level signal from them to the HLLC and set the pot to match the subwoofer.Use the signal/music in the vehicle to generate a turn on power for a trunk mounted amplifier without running wires from the front all the way to the back.If you do not use differential input, you can burn your factory radio or head unit.Mobile Audio: Tap into the rear speakers to use their signal to power the high-level input.Allows users to reduce the signal level down to a range 0.1 volts to 5 volts.Reduces high power output of an amplifier to produce a low level input.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |